Wireless RFID Mifare Wiegand reader
For doors without a power connection on the outside as well as for opening the door directly from the workplace or reception, this reader with battery operation can be used immediately without wiring. The Wiegand code is transmitted to the access control by radio after the transponder or RFID key fob is placed on the door and then the door relay is released after checking the authorization in the access control unit.
Radio range up to 30m
Wall-mounted transmitter
Dimensions: 120x50x20mm
3 AAA batteries required
Transfer in 433 Mhz rolling code 13.56 Mhz,
Output: Wiegand 26 / 34bit
including board receiver 12VDC Dimensions: 50x25mm Operating instructions PDF
Door-Control with Wiegand Radio Modul The WFM1 receiver forwards the unique signals of the 4 keys FS4 remote control to a connected Wiegand controller on. Each button can be assigned to a shift and every keystroke is logged with the name, date and time. The WFM1 can be mounted indoors and is thus protected against environmental influences and sabotage attempts. The read range is up to 50m in free field and correspondingly less through walls and ceilings. The WFM1 works only with connected controller device like sBoard, SC3001NT, SC3002NT or SC3004NT.
Specifications
Operating voltage
12V DC
Wiegand Interface
26 bit
Reading range
Up to 50m
Cable length
1m
Current consumption
20mA
Connection length
up to 100m
Surroundings
-20 ° C to 60 ° C, 95% non condensing
Dimensions
70mm x 40mm x 38mm
Weight
110g
Certification
FCC & CE
Connections (wires)
Red
12V DC
Black
DC GND (-)
Green
Wiegand D0
White
Wiegand D1
Blue
without function
Yellow
without function
The RTU5024 is a remote switch which is controlled via a mobile radio. It can be used for all safety-relevant applications, as for the switching operation, the phone number of the inserted SIM card must be known and it can be triggered only by previously set telephone numbers.The programming is pretty easy with an Android App . A call of an authorized phone number is sufficient to trigger the switching operation. There is no cost, because of the RTU5024 of the call is not accepted, but checks only the number of the caller. For all "non-Android phones", you can easily set up the RTU5024 with the enclosed, German instructions via SMS commands.
When you set up, you may incur costs for SMS.The actual use as access control is free.
German manual is supplied orderQuad-band 850/900/1800/1900 MHzPotential-free relay output NO/NC, 3A/240VACPower supply 9-24VDCPower consumption at 12V Max 50mA, standby 25 mA50 ohm SMA antennaWorking temperature-20 ° C to + 60 ° CHumidity up to 90% RHDimensions 76 x 27 x 102 mm (Lxhxw)Weight 180 g
Keychain Radio Transmitter 4 unique Wiegand radio buttons (Any key answer any remote control is unique, each keystroke is logged by the door controller SC300xNT by name, date and time) Frequency: 433 Mhz Range: in free field max. 50m Dimensions: 57mm x 30mm x 12mm Colour: dark blue / chrome Send confirmation: Blue LED with battery A27 and carabiner Matching Wiegand radio receiver
€15.95*
This website uses cookies to ensure the best experience possible. More information...