For the reliable operation of your access control system a stable power supply is very important. The available active access components require 12V DC voltage. The
power consumption is determined by the components of the control units
and consumers, such as electric door openers, door lock, etc. Please choose the right dimensioned power supply for all components.
For exampleCode locks with near-site Power supply and concealed installation in flush-mounted boxes, the internal PSU PSC12010 with 12V / 1A and IP64 protection class particularly suitable.
For
assembly and for the safe operation of the access control with SC3000NT
and SC900NT controllers we recommend the use of the housing with low-power switching power supply BU12V-E. Up to two circuit boards are housed in the housing. The power supply provides up to 5A, making it for all requirements in particular strikes with high power consumption prepared.
To supply available devices with 12V DC voltage in existing installations with AC voltage (16V - 28V) or DC (16V - 28V) you can us the our voltage converter 28-12.
To
switch off all electrical consumers in hotel, guesthouse, office and
apartment we have the RFID main switch - added to our shop PowerSaver for EM4102 and MIFARE cards cards. When leaving the premises, the power is turned off automatically. By installing the current costs are lowered and increases safety in the building.
Housing with improved, modern and energy-efficient 12V switching power supply unitfor door controllers SC3001NT, SC3002NT, SC3004NT, SC901NT, SC902NT, SC904NTsheet steel housing 28x23,5x7cm, with lockable doorwith integrated switching power supply 100-250V - 12V DC voltageMax. simultaneous withdrawal 5AStabilized, overvoltage-proof, electronic overload and short-circuit protection
12V Signalgeber für Gleichspannungkann z.B. parallel zu einem Gleichspannungs-Türöffnerverwendet werden um akustisch die Türöffnung anzuzeigen.zu hören ist.
Maße: D10x10mmFrequenz: 2600 Hzmit Anschlussleitung 15cm
For installation in cases, boxes (wall outlets) stabilized output voltage Input: 100 - 240VAC Output: 12VDC 1000mA at below 30 ° C. 700mA to 40 ° C encapsulated IP64 D55x25mm
Energy-efficient and space-saving power supply for installation in electrical distribution boards (DIN rail); The power supply is suitable for all access control devices available in the shop such as code locks with PIN code and RFID as well as access controllers and RFID readers. The power supply unit is simply plugged onto a top-hat rail in your electrical distribution system and snapped in. The wires to be stripped are connected via the screw terminals. 2 TE (35mm) narrow version Stabilized output voltage, short-circuit proof Input: 85 - 264V AC, 50/60Hz 0,3W Idle power Short circuit proof Overvoltage protection category 3 overload protector Output: 12V DC / 2000mA LED for operating status display Dimensions: 35x90x55mm Ambient temperature: -30°C to 70°C Compatible to DIN rail TS-35/7.5 Colour: black
Housing with UPS emergency power supply for door opening in case of power failurefor door controllers SC3001NT, SC3002NT, SC3004NTsheet steel housing 28x23,5x7cm with integrated UPS power supply 40W200-240V - 12V DC voltageStabilized, surge-proof,Electronic overload and short-circuit protection.Automatic uninterruptible switchover to battery operation in the event of power failure.Incl. 1.2 Ah battery for approx. 5 hours. Complete supply incl. approx. 50 door openings.The power supply unit supplies the controller board and also the connectedloads, such as door openers or other devices (observe max. current consumption)for mounting 1 or 2 controller boards (please order spacers for the 2nd board)Wiring by electrician only!
Stabilized power supply unit 24WInput voltage 100-240VAC12V +/-0,5V the IMDS of loadMax continuous current (2000mA) short circuit protection (reverse setting) 2, 0astabilized,Devices with lower power consumption (0... 1A... 1, 5A)can be connected safelyWires for connection to access control stripped and tinnedred wire + 12V, black wire (-) GND
very low idle power consumption
for installation in electrical distribution boards (top-hat rail)Stabilized output voltage, short-circuit proofInput: 200 - 240VACOutput: 12VDC / 4500mADimensions: 52.5 x 90 x 54.5mm
RFID main switch To switch off electrical loads Power-saving system, Power SaverFor hotel rooms, apartments, flats, offices, etc.Insert the card. Outlet and light can be used.Remove card. The 20 second timer is activatedLeave room Lighting and outlets are disabledFor surface mountingSwitch 110V - 250V, 16A contactor or circuit, all circuitsInstallation only by qualified personnelResponds to any RFID card or compatible with EM4102 chip manufacturers
Info
