Readers for access control with ISO1443 chip

Glass touch keypad  and dual frequency RFID access control for EM4102 / 4100/4200 and ISO14443 compatible transponders  Full metal housing with concentrated double reading field through the LED bar and solid PIN code keypad  The use of plastic on the housing could almost be dispensed with.  Potted waterproof, suitable for outdoor areas  Multifunction with PIN code and RFID multi-protocol reader  Standalone function with relay output  Reading function connected to Wiegand connection for evaluation units such as Sboard access controllers and SC3000NT. The relay switching then takes place inside, so attempts at sabotage on the wall reader are ineffective. Technical details: PIN code and RFID reader full metal housing Glass keypad Color: cappuccino black Operating mode: standalone or reader (Wiegand) Dual frequency 125 khz and 13.56 Mhz RFID chip types 125KHz: HID prox, EM4200, EM4102 UID RFID chip types 13.56MHz: ISO 14443 Output format: Wiegand 26 / 34bit Housing: waterproof encapsulated IP65 LED and beep can be switched off Power supply: 12V DC, 50mA Dimensions: 170 x 83 x 26mm Download instruction manual: sKey2 instruction manual.pdf

Access Control Multi RFID Reader RFID wall mountable reader for EM4102 and 13,56MHz Full metal housing with concentrated double reading field through the LED barInternational award-winning designPotted waterproof, suitable for outdoor areas TheRFID card reader will beconnected to access controller like sBoaard and SC3000NT via the Wiegand interface.The relay switching takes placein doors,sabotage attempts on the wall readers are therefore ineffective. Material: full metal, finished, Color: cappuccino black Dimensions: 103x48x22 mm Temperature range: -20 ° C to 50 ° C Protection class: IP65 Multiprotocol RFID: 125kHz: EM4102, EM4100, EM4200 Compatible RFID Chip types:13.56 MHz:  compatible to Mifare® Classic 1k and 4k, 4byte and 7byte UID ISO14443A Compatible RFID Chip types: 13.56 MHz: compatible to DESFire® EV1 and EV2 and EV3 , compatible to Ultralight®, NTAG and compatible 7byte UID Power supply: 12V DC, <35mA Operating display: LED bar red Green LED bar and beeper can be controlled Tampering alarm function The cable length to the controller can be up to 100m. Wiegand output: 34 bit for all protocols    

Glass touch keypad  and dual frequency RFID access control for EM4102 / 4100/4200 and ISO14443 compatible transponders  Full metal housing with concentrated double reading field through the LED bar and solid PIN code keypad  The use of plastic on the housing could almost be dispensed with.  Potted waterproof, suitable for outdoor areas  Multifunction with PIN code and RFID multi-protocol reader  Standalone function with relay output  Reading function connected to Wiegand connection for evaluation units such as Sboard access controllers and SC3000NT. The relay switching then takes place inside, so attempts at sabotage on the wall reader are ineffective. Technical details: PIN code and RFID reader full metal housing Glass keypad Color: cappuccino black Operating mode: standalone or reader (Wiegand) Dual frequency 125 khz and 13.56 Mhz RFID chip types 125KHz: HID prox, EM4200, EM4102 UID RFID chip types 13.56MHz: ISO 14443 Output format: Wiegand 26 / 34bit Housing: waterproof encapsulated IP65 LED and beep can be switched off Power supply: 12V DC, 50mA Dimensions: 160 x 45 x 26mm Download instruction manual: sKey2 instruction manual.pdf

Ready for installation in wooden panels, tiles, also metal, 20mm hole required Tamper-proof (Controllers are mounted in the safe area) Tamper tests on the antenna are ineffective LED integrated Standby = red LED on Detection transponder = LED Red blinking LED switch off when wire (yellow) is disconnected Waterproof, suitable for outdoor applications Dimensions Cap: d26x3mm Dimensions thread Hole: d20 Power supply: 12v DC voltage Current consumption: approx. 30ma Temperature range:-30 °c to 60 °c Protection class: IP68 Cable Length: 15cm Reading speed: approx. 0.1 seconds Interface: Wiegand 34 bit 2 Cores for data transmission The line length up to the controller can be up to 100m. Reading distance: up to 2cm RFID type: 13.56 MHz, ISO14443 Optional accessories:Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label

Ruggedized PIN code and dual frequency RFID access control for EM4102 / 4100/4200 and ISO14443 compatible transponders  Full metal housing with concentrated double reading field through the LED bar and solid PIN code keypad  The use of plastic on the housing could almost be dispensed with.  Potted waterproof, suitable for outdoor areas  Multifunction with PIN code and RFID multi-protocol reader  Standalone function with relay output  Reading function connected to Wiegand connection for evaluation units such as Sboard access controllers and SC3000NT. The relay switching then takes place inside, so attempts at sabotage on the wall reader are ineffective. Technical details: PIN code and RFID reader full metal Color: cappuccino black Operating mode: standalone or reader (Wiegand) Dual frequency 125 khz and 13.56 Mhz RFID chip types 125KHz: HID prox, EM4200, EM4102 UID RFID chip types 13.56MHz: ISO 14443 Output format: Wiegand 26 / 34bit Housing: waterproof encapsulated IP65 LED and beep can be switched off Power supply: 12V DC, 50mA Dimensions: 170 x 83 x 26mm Download instruction manual: sKey2 instruction manual.pdf

Sebury sKey wideStand alone access control systemISO14443 Can be used as a complete unit with integrated memory and relay outputoras tamper-resistant variant as a mere reader in conjunction with a door controller- Elegant and robust aluminum housing- Waterproof IP65- Illuminated Metal Keypad and RFID reader for contactless transponder- 2000 memory locations for key codes and transponders- Adjustable : code or transponder / code and transponder / transponder only- Additional data output for professional applications : Wiegand 26-37 bits- Tamper switch in the housing- LEDs and beeper integrated- Audible alarm if tampering- Alarm output- Integrated change-over relay- Circuit as pulse 1-99 seconds- Or as a continuous circuit ON-OFF - ON-OFF for switching functions- Bell button directly led out ( internal resistance of about 80 ohms) for electronic Gong ( max. 10mA )  or Doorbell decoder- Multi-user function , 2-10 persons must identify themselves before the door is opened.- Circuit as a single unit or as an anti -passback with two readers for one door- Transponder reading distance : up to 3 -10cm- Dimensions sKey -w : 125x83x22mm- Power supply: 12V -24V DC- Current: 35mA- Temperature range : -40 ° C to 60 ° C- Status display : multi-function display (can be deactivated )- Keyboard Backlight : white, On or Off , or Auto ( the 1st press ON , 30 sec OFF)- Keypad tones (can be disabled )Or use as Wiegand reader in conjunction with a door controller- Transponder data is transferred- Keyboard signals can be set as 4bit , 8bit or as a virtual card number- 26bit to 37bit adjustable WiegandmodusReadable transponder types :13.56MhzISO14443 1k, 4k, 4byte oder 7byteScope of delivery:- Outdoor unit / Access host sKey standalone wide- Manager Cards ( learning and delete card )- Small and fixing material- Manual (english) Print- Manual ( German ) as PDFManual DownloadOptional AccessoriesInstallation cable by meter Power SupplyISO14443 TAGsDoor OpenerController Network Controller Compact Doorbell decoder  

Active RFID reader antenna for contactless LEGIC transponder Tamper-proof because the transmitter is mounted in the security area is Sabotage attempts on the antenna are ineffective Intergrated LED and beeper Water resistant, suitable for outdoor applications for Legic Prime, Legic Advant, ISO14443A, ISO14443 1k, ISO14443 4k, compatible to Mifare® compatible to Classic®, compatible to Desfire®, compatible to ISO15693,  compatible to I-Code, compatible to TAG-IT, compatible to Felica & iCLASS (UID only)

Active RFID reader antenna for contactless EM transponder Tamper-proof mounted, the controller is in the security area Sabotage attempts on the antenna are ineffective Integrated LEDs and beeper Waterproof cast, suitable for outdoor applications Dimensions: 80x42x14mm Power supply: 12V DC Current consumption: approx 45mA Interface: Wiegand 26 2 wires for data transfer (send and receive) The cable length to the controller can be up to 100m. Reading distance: up to 10cmRFID type: 13,56 Mhz , ISO14443 1k and 4k

Aktive RFID Leseantenne für berührungslose  RFID Transpondermit seitlichem Kabelausgang und Selbstklebepads für Befestigung an Glastüren, Fenster mit Scheibenmontage als Hinterglas Befestigung Liest durch Doppelverglasung oder Holz keine Manipulation oder Sabotage möglich Beeper integriert Maße:70x70x15mm Gehäusefarbe: spaceblack Spannungsversorgung: 12V Gleichspannung Stromaufnahme: ca. 26mA Interface: Wiegand 26/34 bit 2 Adern für Datenübertragung (Senden und Empfangen) Die Leitungslänge bis zum Controller kann bis zu 100m betragen. Konfiguration Wiegand 26/34: Lesbare kompatible Transpondertypen: ISO14443 kompatibel, 13,56 Mhz , kompatibel zu MIFAR®E classic 1k oder 4k (4byte und 7byte), kompatibel zu Ultralight 64bit, Desfire® EV1, EV2, EV3, NTAG Transpondererkennung: Beeper an Optionales Zubehör: Installationsleitung Meterware TCP-IP ControlleroderController Kompakt Transponder

RFID reader antenna for contactless EM transponder Tamper-proof mounted, the controller is in the security area Sabotage attempts on the antenna are ineffective Integrated LEDs and beeper Waterproof cast, suitable for outdoor applications Dimensions: 80x42x14mm Power supply: 12V DC Current consumption: approx 45mA Interface: Wiegand 34 2 wires for data transfer (send and receive) The cable length to the controller can be up to 100m. Reading distance: up to 10cmRFID type: 13,56 Mhz , ISO14443 1k and 4k, and Desfire and Ultralight

Active RFID reading antenna for contactless ISO14443 tagsTamper-proof because the evaluation electronics / controller is mounted in the fuse areaAttempts to sabotage the antenna have no effectIntegrated LEDs and beeperWaterproof encapsulated, suitable for outdoor applicationsDimensions:110x48x20mmColour: blackPower supply: 12V DCPower consumption: approx. 45mAReading distance: up to 5cmInterface: Wiegand 34bitCompatible Transponder types: 13.56 Mhz, ISO14443 1k or 4k (4byte and 7byte), Status display: Red LED onRFID recognition: green LED on, beeper onCompatible USB readers for access control (Wiegand 34):  

  Active RFID reader antenna for ISO14443 tagsPure white and extra flat, for mounting on flush-mounted boxesSabotage-proof because the transmitter / controller is mounted in the backup areaSabotage attempts on the antenna are ineffectiveLEDs and beeper integratedWaterproof shed, suitable for outdoor applicationsDimensions: 88x88x15mmColor: pure white high glossPower supply: 12V DCCurrent consumption: 45mAInterface: see selection above2 wires for data transfer (sending and receiving)The line length to the controller can be up to 100m.Reading distance: up to 10cmcompatible RFID type:13,56 Mhz, ISO14443 1k, 4k oder kompatibel (UID) Status indicator: Red LED onTransponder detection: Green LED, beeper to Status indicator: Red LED onTag identification: Green LED, beeper onOptional Accessory: Controller Tags, Cards, Key fobs

Tamper-proof mounted,  the  controller is  mounted in the security area Sabotage attempts on the antenna are ineffective Integrated LEDs and beeper Waterproof cast, suitable for outdoor applications Dimensions: 115x75x15mm Power supply: 12V DC Current consumption: approx 45mA Interface: Wiegand 26 2 wires for data transfer (send and receive) The cable length to the controller can be up to 100m. Reading distance: up to 10cm Transponder type: 13.56 MHz, ISO14443 (UID), all types Optional Accessories:Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label

RFID wall mountable reader for EM4102 andI SO14443 tag Material: Plastic Color: black Dimensions: 120 * 85 * 23 mm Temperature range:-40°C to 60°C Protection class: IP68 RFID compatibility: 125 kHz: EM4102, EM4200, 13.56 MHz: ISO14443 , Power supply: 12V DC, 330mA Wiegand output: 34bit LED and beeper  

Active RFID Reader for contactless MIFARE® DESFire® EV1 TagsSabotage-proof because the transmitter / controller is mounted in the fuse area sabotage attempts on the antenna are ineffectiveIntergrated LED and beeper Splash-proof, suitable for outdoor applicationsDimensions: 126x68x19mmPower supply: 12V DCPower consumption: ca. 10mA2 wires for data transfer (sending and receiving)The line length to the controller can be up to 100m.Reading distance: up to 10cmReadable RFID type: 13.56Mhz compatible to MIFARE® DESFire® EV1Optional accessories:Controller  

Active RFID reader antenna for contactless ISO14443 ® tagSabotage safe full metal caseSecure the sabotage because the controller is mounted into the security restricted areaSabotage attempts are ineffective on the antennaIntegrated LEDs and beeperWaterproof, suitable for outdoor applicationsDimensions: 121x80x26mmPower supply: 12V - 18V DCPower consumption: approx. 45mATemperature range:-20 ° C to 60 ° CProtection class: IP68Cable length: 3 mRead speed: 0.1 secondsInterface: Wiegand 262 wires for data transfer (sending and receiving)The cable length can be up to 100 m up to the controller.Reading distance: up to 6 cmTransponder type: 13.56 MHz, ISO14443 1 k or 4 k compatible to: KEYFLEX 1000 aktiv SEBURY W1 SEBURY W2 SEBURY K3A SEBURY K4A SC3001NT SC3002NT SC3004NT

The QR Code and Barcode Scanner with RFID reader is suitable for connecting or expanding your access control with Wiegand interface. In addition to authorized RFID cards and keys, you can send QR Codes to your customers for access or other applications to their mobile phone or smartphone. These QR Codes are authorized for e.g. door opening, operation of a barrier system, goods issue etc. in the evaluation unit such as sBoard or SC3000NT. By holding a smartphone with a displayed QR Code or barcode card in front of it, the reader is automatically activated. After successful reading, a beep is emitted and the code read in is transmitted to the evaluation unit. In addition, a full-fledged RFID MIFARE® reader is integrated, which allows access even with RFID tags.    Robust mini-reader for 1D, 2D, barcodes QR-Codes    Readable codes: EAN-13, EAN-8, UPC-A, UPC-E, Code128, Code39, Codabar,    UCC/EAN 128, RSS, ITF, ITF-14, ITF-6, Standard-25, Matrix-25, COOP-25,    Industrial-25, Plessey, MSI-Plessey, Code-11, Code-93, Code-49, Code16k,    PDF417, QR Code, Data Matrix, AZTEC, CSC, Maxicode, Micro-QR,    Micro-PDF417, Code One, etc.    compatible to MIFARE® Classic / DESFire® / NTAG reader integrated    Wall mounted enclosure    Dimensions: WxHxD 78x125x25mm    with proximity sensor    automatic reading mode preset    for 12V DC    Wiegand 34bitPre-assembled incl. Wiegand 34bit converter and the components listed below, an access control with barcode cards and QR Code can be set up.    simple door controller    Network door controller The connection diagram for the access control with network controller SC3001NT can be downloaded hereWiring diagram QR Code reader BS-430 with SC3001NTComplete setHere you find the QR Code complete setAnd here we produce QR Code labels:32x22mmor80x50mm

Wireless RFID Mifare Wiegand reader For doors without a power connection on the outside as well as for opening the door directly from the workplace or reception, this reader with battery operation can be used immediately without wiring. The Wiegand code is transmitted to the access control by radio after the transponder or RFID key fob is placed on the door and then the door relay is released after checking the authorization in the access control unit.  Radio range up to 30m Wall-mounted transmitter Dimensions: 120x50x20mm 3 AAA batteries required Transfer in 433 Mhz rolling code 13.56 Mhz,   Output: Wiegand 26 / 34bit including board receiver 12VDC Dimensions: 50x25mm Operating instructions PDF

Active RFID reader antenna for contactless ISO14443 ® tagSecure the sabotage there is mounted the transmitter / controller into the security restricted areaSabotage attempts are ineffective on the antennaIntegrated LEDs and beeperOpen Board for self installationin Siedle Vario or Ritto blind modules, or, or...Scope of delivery incl. housing fig. 3Mass housing: 80x42x14mmDimensions Board: 60x34x11mm incl. antennaPower supply: 12V DCPower consumption: approx. 45mAReading distance: up to 10 cmTransponder type: 13.56 MHz, ISO14443 1 k or 4 K or compatible (UID) Status display: Red LED on Tag detection: Green LED, beeper, on   kompatible with: KEYFLEX 1000 aktiv SEBURY W1 SEBURY W2 SEBURY K3A SEBURY K4A SEBURY BC2008NT SEBURY BC800NT1 SEBURY BC800NT2 SEBURY BC800NT4 SC901NT SC902NT SC904NT

Active RFID reader antenna for contactless universal transpondersTamper-proof as the evaluation electronics is mounted in the safe areaSabotage attempts at the antenna are ineffectiveLEDs and beeper integratedWaterproof sealed IP65Dimensions: 86x86x19mmPower supply: 12V DC voltagePower consumption: 45mA2 cores for data transmission (transmission and reception)Wiegand34 output format and PIN code 4BitThe cable length up to the controller can be up to 100m.Read distance: up to 5cmInterface: Wiegand 34bitTransponder types:    Cards and key fobs: ISO14443 1k or 4k (4 byte and 7byte) transponder cards and key fobs, Status display: LED red onTransponder detection: Green LED on, beeper onCompatible USB readers for access control (Wiegand 34):ISO14443 1k or 4kDesfire® EV1 and EV2Optional accessories:Installation cableNetwork TCP-IP ControllerorController Compact (not compatible with Sboard-II)

Sebury  sTouch wide Stand alone access control system with PIN Code and ISO14443 tags Can be used as a complete device with integrated memory and relay outputoras tamper-resistant  reader  connected with a door controller -Elegant and robust aluminium housing-Waterproof IP65-Illuminated metal keyboard and RFID reader for contactless transponder-2000 memory locations for key codes and transponder-Adjustable: Code or transponder code transponder or only transponder-additional data output for professional applications: Wiegand 26-37 bit-Tamper inside-Integrated led and beeper-Acoustic alarm for sabotage-Alarm output-integrated AC relay-Circuit as impulse 1-99 seconds- or as a permanent circuit on off on off for switching functions-Push button directly deduced (internal resistance approx. 80 ohms) only for electronic chime (max. 10mA)or doorbell＞ decoder-Multi user feature, 2-10 persons to identify themselves before the door is opened.-Circuit as a single unit or as anti-PassBack with two readers for a door-Reading distance tag: up to 3-10cm-Mass sTouch w: 125x83x22mm-Power supply: 12V DC-Current: 35mA-Temperature range:-40 ° C to 60 ° C-Indicator: multi function display (can be switched off)-Keypad illumination: white (can be switched off or automatic approach)-Keypad tones (can be switched off) Readable tag types:13,56 MhzISO14443 1k, 4k, 4byte or 7byte PRODUCT COMPARISON Scope of delivery:-Outdoor unit/access host sTouch standalone wide-Manager cards (learning and deleting card)-Small - and fixing material-Manual (English) print-Guide (german) as PDF Manual Download Optional AccessoriesInstallation cable by meterDoor OpenerController Network Controller Compact Doorbell decoder