Access Control Multi RFID Reader RFID wall mountable reader for EM4102 and 13,56MHz Full metal housing with concentrated double reading field through the LED barInternational award-winning designPotted waterproof, suitable for outdoor areas TheRFID card reader will beconnected to access controller like sBoaard and SC3000NT via the Wiegand interface.The relay switching takes placein doors,sabotage attempts on the wall readers are therefore ineffective. Material: full metal, finished, Color: cappuccino black Dimensions: 103x48x22 mm Temperature range: -20 ° C to 50 ° C Protection class: IP65 Multiprotocol RFID: 125kHz: EM4102, EM4100, EM4200 Compatible RFID Chip types:13.56 MHz:  compatible to Mifare® Classic 1k and 4k, 4byte and 7byte UID ISO14443A Compatible RFID Chip types: 13.56 MHz: compatible to DESFire® EV1 and EV2 and EV3 , compatible to Ultralight®, NTAG and compatible 7byte UID Power supply: 12V DC, <35mA Operating display: LED bar red Green LED bar and beeper can be controlled Tampering alarm function The cable length to the controller can be up to 100m. Wiegand output: 34 bit for all protocols    

Door-Control with Wiegand Radio Modul The WFM1 receiver forwards the unique signals of the 4 keys FS4 remote control to a connected Wiegand controller on. Each button can be assigned to a shift and every keystroke is logged with the name, date and time. The WFM1 can be mounted indoors and is thus protected against environmental influences and sabotage attempts. The read range is up to 50m in free field and correspondingly less through walls and ceilings. The WFM1 works only with connected controller device like sBoard, SC3001NT, SC3002NT or SC3004NT.   Specifications Operating voltage 12V DC        Wiegand Interface 26 bit Reading range Up to 50m Cable length 1m Current consumption 20mA Connection length up to 100m Surroundings -20 ° C to 60 ° C, 95% non condensing Dimensions 70mm x 40mm x 38mm Weight 110g Certification FCC & CE Connections (wires) Red 12V DC Black DC GND (-) Green Wiegand D0 White Wiegand D1 Blue without function Yellow without function

Active RFID reading antenna for contactless HITAG tagsTamper-proof as the evaluation electronics / controller is mounted in the fuse areaSabotage attempts at the antenna are ineffectiveLEDs and beeper integratedWaterproof encapsulated, suitable for outdoor applications Dimensions: 120x40x18mm Colour: black Cable length: approx. 200cm Power supply: 12V DC voltage Power consumption: approx. 40mA Interface: Wiegand 34bit Read distance: up to 10cm Transponder type: 125 khz, HITAG 1, HITAG 2, HITAG S Interface: Wiegand 34bit Transponder type: 125 khz, EM4100, EM4102, EM4200 Interface: Wiegand 26bit Status display: LED blue and red, LED green and beeper switchable Transponder recognition: beeper on Optional accessories:Installation cableTCP-IP ControllerorController CompactRFID tags  

Active RFID reader antenna for contactless LEGIC transponder Tamper-proof because the transmitter is mounted in the security area is Sabotage attempts on the antenna are ineffective Intergrated LED and beeper Water resistant, suitable for outdoor applications for Legic Prime, Legic Advant, ISO14443A, ISO14443 1k, ISO14443 4k, compatible to Mifare® compatible to Classic®, compatible to Desfire®, compatible to ISO15693,  compatible to I-Code, compatible to TAG-IT, compatible to Felica & iCLASS (UID only)

Active RFID reader antenna, wide-range antenna or antenna distance with extreme range of car or truck access control E801 adhesive transponder to the windshield or car UHF tags on or behind the front apron or ISO card K600-A-UNI + UHF Suitable for all contactless UHF transponders 868Mhz or compatible Sabotage-proof because the transmitter is mounted in the security area Sabotage attempts on the antenna are ineffective Beeper integrated Splash-proof, suitable for outdoor applications Dimensions: 220x220x50mm Power supply: 12V DC Current consumption approx 150mA incl. connection for Wiegand data Default: 15 seconds after detection Lesepause The cable length to the controller can be up to 100m. Reading distance: up to 6m, (depending on circumstances) Tag type: U-Code HSL or compatible Delivery incl. Mounting Unit

With this QR Code access system you can grant your customers or guests access with QR codes sent to their mobile phone or smartphone. Other possible applications include the activation of a goods issue, admission control for events, etc. The QR Code Reader is connected to the interface adapter included in the set at the SC3001NT controller reader input. After configuring the SC3001 access control with the management software, any QR codes can be created for the access.The set contains the following items:1 x QR Code Scanner BS-4301 x Access controller SC3001NT1 x Software Z3D in german1 x QR Code Software to create the QR Codes

By presenting a smartphone with a displayed or paper code, previously authorized QR/barcode, image recognition is automatically activated. Alternatively, non-contact RFID transponders can also be recognized via the integrated reading field. After successful reading, a beep is emitted and the read code is transmitted to the evaluation unit. Depending on the authorization specified, a switching contact is released to open the door or similar.    Robust frontal reader for 1D, 2D, barcodes and QR codes    including RFID reader for Unique Transponder 125 khz, EM4102/EM4200    Dimensions: WxHxD 86x86x18mm    Can be mounted on a flush-mounted box    Electronics cast with epoxy    Image recognition reading distance 5cm to 30cm    Automatic reading mode preset    Lighting QR code scanner adjustable    for 12V DC / 400mA    IP52    Operation LED blue, detection LED green    Output format preset:    QR code/barcode: Wiegand 34bit    RFID 125khz: Wiegand 34bit     simple door controller    Network door controller

Active RFID reader antenna, wide-range antenna or antenna distance with extreme range of car or truck access control E801 adhesive transponder to the windshield or car UHF tags on or behind the front apron or ISO card K600-A-UNI + UHF Suitable for all contactless UHF transponders 868Mhz or compatible Sabotage-proof because the transmitter is mounted in the security area Sabotage attempts on the antenna are ineffective Beeper integrated Splash-proof, suitable for outdoor applications Dimensions: 220x220x50mm Power supply: 12V DC Current consumption approx 150mA incl. connection for Wiegand data Default: 15 seconds after detection Lesepause The cable length to the controller can be up to 100m. Reading distance: up to 6m, (depending on circumstances) Tag type: U-Code HSL or compatible Delivery incl. Mounting Unit

Active RFID Reader for contactless MIFARE® DESFire® EV1 TagsSabotage-proof because the transmitter / controller is mounted in the fuse area sabotage attempts on the antenna are ineffectiveIntergrated LED and beeper Splash-proof, suitable for outdoor applicationsDimensions: 126x68x19mmPower supply: 12V DCPower consumption: ca. 10mA2 wires for data transfer (sending and receiving)The line length to the controller can be up to 100m.Reading distance: up to 10cmReadable RFID type: 13.56Mhz compatible to MIFARE® DESFire® EV1Optional accessories:Controller  

Robust mini reader for D1, D2, QR codesDimensions: WxHxD 41x23x50mmwith RS232 outputincl. power supply unitautomatic reading mode presetin conjunction with our Wiegand converter, an access control system with barcode cards can be set up.simple door controllerNetwork door controller

The QR Code and Barcode Scanner with RFID reader is suitable for connecting or expanding your access control with Wiegand interface. In addition to authorized RFID cards and keys, you can send QR Codes to your customers for access or other applications to their mobile phone or smartphone. These QR Codes are authorized for e.g. door opening, operation of a barrier system, goods issue etc. in the evaluation unit such as sBoard or SC3000NT. By holding a smartphone with a displayed QR Code or barcode card in front of it, the reader is automatically activated. After successful reading, a beep is emitted and the code read in is transmitted to the evaluation unit. In addition, a full-fledged RFID MIFARE® reader is integrated, which allows access even with RFID tags.    Robust mini-reader for 1D, 2D, barcodes QR-Codes    Readable codes: EAN-13, EAN-8, UPC-A, UPC-E, Code128, Code39, Codabar,    UCC/EAN 128, RSS, ITF, ITF-14, ITF-6, Standard-25, Matrix-25, COOP-25,    Industrial-25, Plessey, MSI-Plessey, Code-11, Code-93, Code-49, Code16k,    PDF417, QR Code, Data Matrix, AZTEC, CSC, Maxicode, Micro-QR,    Micro-PDF417, Code One, etc.    compatible to MIFARE® Classic / DESFire® / NTAG reader integrated    Wall mounted enclosure    Dimensions: WxHxD 78x125x25mm    with proximity sensor    automatic reading mode preset    for 12V DC    Wiegand 34bitPre-assembled incl. Wiegand 34bit converter and the components listed below, an access control with barcode cards and QR Code can be set up.    simple door controller    Network door controller The connection diagram for the access control with network controller SC3001NT can be downloaded hereWiring diagram QR Code reader BS-430 with SC3001NTComplete setHere you find the QR Code complete setAnd here we produce QR Code labels:32x22mmor80x50mm

Active RFID reader antenna for contactless HITAG tags Tamper-proof mounted, the controller is in the security area Dimensions module including antenna: 45x41x10mm Power supply: 12V DC Power consumption: about 45mA Interface: Wiegand 26 2 wires for data transfer (send and receive) The line length to the controller can be up to 100m. RFID Reading distance: up to 10cm RFID type: 125 khz, HITAG 1, HITAG 2, HITAG S or compatible (UID) Status display: none

Active RFID reader antenna, wide range antenna or long range distance antennaSuitable for all UHF Tags  868 MHz or compatibleIntegrated beeperSplash-proof, outdoor suitableDimensions: 160x160x55mmPower supply: 12V DCPower consumption approx. 280mAPreset: Wiegand26bit outputDefault: read break detection 5 seconds(applies only to the currently read transponders)The antenna can be adjusted for the two types of reading EPC or TID(Please specify when ordering)The cable length can be up to 100 m to the controller.Reading distance: up to 3 m (depending on conditions)Transponder type: U-code HSL or compatibleScope of delivery incl. mast bracketWiring with W2-2Wiring with network controllerUHF Tags are well recognized when you  stick on a car windshield (min. 5cm please maintain a distance from metal spars) E801 or E802 or screw mounting on a vehicle sign holder or glued behind the plastic front bumper E840The dual cards K600-A-UNI + UHF have a UHF and a 125 kHz LF to use tag to multiple systems. The cards are read well if they are held to the antenna in the hand, there is but a severe restriction of the range when the cards are tightly worn on the body. Water or metal weakens the reading field.All UHF transponder with your two basic reading types:Article design reading strategiesE801 sticker TIDE802 sticker EPCE804 sticker TIDE840 car Assembly TIDE850 laundry transponder TIDE509 bracelet TIDK600 map TID and EM4102K810 Keychain EPC

This hand-held scanner with Wiegand 34-bit output format is the alternative to the BS-430 wall scanner and can be used for events or selective events as a person authorization with e.g. turnstile activation. You can send your customers QR codes to their mobile phones or smartphones for access or other applications, which are authorized, for example, to open doors, operate a barrier system, goods issue etc. in the evaluation unit such as sBoard or SC300xNT.    Robust hand reader for 1D, 2D, barcodes and QR codes    Cable length about 2m    Scans at the touch of a button    for 12V DC    Output format Wiegand 34bitPre-assembled including Wiegand 34bit converter and the components listed below, an access control with barcode cards and QR code can be set up.    simple door controller    Network door controller The connection diagram for access control with network controller SC3001NT can be downloaded here:Connection diagram QR code reader BS-430 with SC3001NT finished QR code labels:32x22mmor80x50mm

The RTU5024 is a remote switch which is controlled via a mobile radio. It can be used for all safety-relevant applications, as for the switching operation, the phone number of the inserted SIM card must be known and it can be triggered only by previously set telephone numbers.The programming is pretty easy with an Android App . A call of an authorized phone number is sufficient to trigger the switching operation. There is no cost, because of the RTU5024 of the call is not accepted, but checks only the number of the caller. For all "non-Android phones", you can easily set up the RTU5024 with the enclosed, German instructions via SMS commands. When you set up, you may incur costs for SMS.The actual use as access control is free. German manual is supplied orderQuad-band 850/900/1800/1900 MHzPotential-free relay output NO/NC, 3A/240VACPower supply 9-24VDCPower consumption at 12V Max 50mA, standby 25 mA50 ohm SMA antennaWorking temperature-20 ° C to + 60 ° CHumidity up to 90% RHDimensions 76 x 27 x 102 mm (Lxhxw)Weight 180 g

Wireless RFID Mifare Wiegand reader For doors without a power connection on the outside as well as for opening the door directly from the workplace or reception, this reader with battery operation can be used immediately without wiring. The Wiegand code is transmitted to the access control by radio after the transponder or RFID key fob is placed on the door and then the door relay is released after checking the authorization in the access control unit.  Radio range up to 30m Wall-mounted transmitter Dimensions: 120x50x20mm 3 AAA batteries required Transfer in 433 Mhz rolling code 13.56 Mhz,   Output: Wiegand 26 / 34bit including board receiver 12VDC Dimensions: 50x25mm Operating instructions PDF