F007-EM-II
€94.90*
Total Price incl. Accessories €94.90*
No longer available
Total:
*
Product number:
F007-EM-II-1
Product information "F007-EM-II"
Fingerprint reader and RFID reader
for universal RFID tags
Solid steel casing
2160 memory locations (160 fingerprints, 2000 tags)
Fingerprint or RFID tag can open "the door"
for universal RFID tags
Solid steel casing
2160 memory locations (160 fingerprints, 2000 tags)
Fingerprint or RFID tag can open "the door"
- Deleting of absent users or lost tags is possible
- Wiegand controller and integrated
- Use as a standalone device (default)
- Use as a pure controller (also for antennas (LEGIC, ISO14443, Hitag, etc.)
- Use as possible Wiegand Reader (with Sure sabotage controller in the security area)
- An output circuit with two EM-F007 possible
- Lock function with two EM-F007 possible
- External door opener button can be connected
- Tamper switch in the case
- Connection for door contact
- For doors, gates, garages, shutters, etc.
- 12V switched output 01-10 seconds adjustable (open-circuit or closed circuit)
- Switching time of the alarm output (sabotage) 0-3 minutes adjustable
- Fail-safe EEPROM memory power
- No PC connection
- blue backlit touch panel
- Intergrated LED and beeper
- Transponder read distance: up to 6cm
- Finger Sensor Resolution: 450 dpi
- Reading time: <1 sec
- Indentification time: <1 sec
- FAR: < 0,00002561%
- FRR: < 0,0198%
- Dimensions: 115x70x35mm
- Weight: ca.500gr
- Power supply: 12V DC (8-14V)
- Power consumption: about 20-90mA
- Temperature range: -20° C to 60 ° C.
- Output load: 20A maximum (short circuit)
- RFID type: Universal 125kHz (EM4102 or compatible)
- including interface: Wiegand 26 bit
Installation and operating instructions
Installation cable
TCP-IP controller
or
Compact controller
Compatible Tags, Cards, Key Fobs, Label
| Protokoll, Bauform, Relais, : | Relais, Wiegand 26 |
|---|---|
| RFID Lesbarer Chiptyp: | 125 kHz, EM4102 |
Login
K694 Uni
From
€1.69*
Design KeychainChip: EM4102 (Universal)Frequency: 125 khzDimensions: 47mm x 24mm x 4mmMassive chrome steel bracketKeyring: yesColor Case: blackImprint Chip-number: noLabel Chip-number: yesNow with EK and ZK number label available.This Transponder is deployable to many manufacturer systems.
Voltage Converter 28V-12V
€9.90*
converts 24V AC or DC voltage to 12V DC Input: AC 20V - 28V, DC 16V - 30V Output: 12V DC, stabilized Load max. 500mA Dimensions: 63x29x25mm
Sboard ISO14443
From
€25.50*
Open door access controllerAccess control system for Wiegandable access readersorcontrol unit as EMA arming/disarming device1000 memory locations for transponders or PIN codesAccess with RFID only, PIN only or RFID + PINSingle RFID tags and PINs can be deleteted separatlyExternal door release button can be connectedLED output for display on the readerOutput adjustable via jumperVoltage is switched directly through (factory setting) or floating relay contact Change-over contactPulse 1-99 seconds or Dynamic ON-OFF-OFF-OFF....Power-fail-safe EEPROM memoryBlock storage with sorted transponders Enter the first UID number and quantity, ready (e. g. 1000 pcs. in approx. 2 minutes)No PC connection neededCopy the entire memory contents into one or more sBoards as a "backup copy" or as a fast creation for several doorsWiegand input 26-37bit e. g. for RFID readers EM4102, HITAG, ISO14443, LEGIC, UHF, etc. with or without PIN-code keypad, magnetic card reader, fingerprint reader, biometric face recognition.When using ISO14443 wall scanners, please always order the ISO14443 programming card set as well, or alternatively use the supplied remote controlDimensions: 65x54x19mmWeight: 40gOperating temperature: -40°C to 60°CPower supply: 12V DC voltageOutput load: max. 2Aincl. infrared programming device for all changes, settings (password protection 6-digit)incl. programming cards Set for your selected ISO14443 wall readerEnglish instruction manualGerman manual as PDF filePower indicator: LED redLED and signal tones can be switched off Wiring samplesHow do I open the case?Operating instructions (german)Manual (english)AccessoriesProgramming Card Set for ISO14443 ReaderInstallation cableSuitable readers with EM 4102 technologySuitable readers with ISO14443 technologySuitable readers OtherPower suppliesDoor opener
Cable JY-ST-Y-4x2-06
€0.50*
sold by the meter 8 wire, twisted pair wires common shielding Installation cable according to DIN EN 50441; VDE 0815 JY (ST) Y 4x2x0, 6mm Insulation: PVC jacket Suitable for installation in dry and damp rooms. Surface or buried, for fixed installation in outdoor areas. Depending on the current consumption of the connected consumer, ensure sufficient cross-section. 0.6 mm = 0.28 mm ² color assignment 1a red 1b blue 2a white 2b yellow 3a white 3b green 4a white 4b brown
YS132XXL
€20.00*
Electric strike DIN right / left Mortise door lock with a flat plate (short) for 12V DC DC Function of load current Current consumption approx 700 mA tested up to 600kg including a small door plate including mechanical Switch for continuous door opening (interlocksystem) including memory function (door can be opened by current pulse x 1) including horizontally adjustable latch Suitable for all standard doors
SVB600 Electrical Door Lock
€99.90*
suitable for wooden doors, steel doors, fire doorsInstallation in the door frame (no mov cable crossings)Massive 16mm steel boltstested up to 1000kgfor 12V DC voltage ("red" and "brown")not suitable for permanently controlled openFunction: via normally open contact ("orange" to "Brown")Current consumption 950mA at openingStand by 20mADimensions boltwork: 100x25x30mmDimensions striking plate: 260x30x39mmincluding back contact for surveillance or alarm system("Blue", "Green" and "White")including counterpart identification (bar closes again when the door was closed)When permission is unlocked and the door can be opened.Always possible mechanical emergency opening (inside thumbturn key cylinder outside)Included, see photo:- El. locking- Counterpart- aperture- Brackets for flush mounting- Lock cylinder including 5 keys and rotary knob- Covers and rosettes- screws
HDR-30-12 Power Supply
€22.90*
Energy-efficient and space-saving power supply for installation in electrical distribution boards (DIN rail); The power supply is suitable for all access control devices available in the shop such as code locks with PIN code and RFID as well as access controllers and RFID readers. The power supply unit is simply plugged onto a top-hat rail in your electrical distribution system and snapped in. The wires to be stripped are connected via the screw terminals. 2 TE (35mm) narrow version Stabilized output voltage, short-circuit proof Input: 85 - 264V AC, 50/60Hz 0,3W Idle power Short circuit proof Overvoltage protection category 3 overload protector Output: 12V DC / 2000mA LED for operating status display Dimensions: 35x90x55mm Ambient temperature: -30°C to 70°C Compatible to DIN rail TS-35/7.5 Colour: black
FP3000
€229.00*
Fingerprint access control door readerWall Mounting Only compatible to SC300xNT Türcontrollerwith access control management software from 7.81For Windows XP, Win7, Win8, Win10Supply 12V DC (100mA current consumption)Solid Aluminium housingDimensions: 120x72x20mmResolution: 450 DPIWiegand outputMatching fingerprint readerApplication/Description
Fingerprint Access Control F6-3
€69.90*
Compact access control system
The door can be opened by fingerprint or tag or with PIN code
Touchless transponder technology RFID
Failure safe EEPROM memory
Connection for door chime
For up to 3000 people
Power saving
Connection for door contact
LED status indicator
Transponder cards as keychains available
Cover contact (tamper)
Relay output for door opener
Connection for external opening button
Alarm output
Wiegand 26bit data output for door controller
Now with managing card
Input voltage DC 12 V
Power consumption 100mA
Dimensions 155 x 66 x 28 (mm)
Weight 206 g incl. packaging and accessories
Temperature range -20°C to 50°C
Humidity 20% - 80%
Capacity: 3000 user
RFID Chip type: EM4102 and compatible
Transponder reading distance of 3-10 cm
Manual
Optional Accessories:
Installation cableNetwork controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label
sPress Fingerprint Reader & Standalone Device
€129.00*
· Compact fingerprint access control system · Modern design · Solid aluminum housing · As a complete stand-alone device · Use or as a reader for external controller · Front waterproof · Mounting plate with grommet not waterproof · Fail-safe EEPROM memory · For up to 1000 people · Energy saving function · Touch button with integrated LED status indicator · Cover contact (tamper) · Direct 12V switch output for door strike, magnetic holder, etc. · Connection for external opening buttons · Wiegand 26bit data output for door controller · Infrared remote control for storing and specific deletion of memory locations TÖ opening time, etc. Input voltage DC 12-24V DC Standby power consumption <10mA Current consumption read operation <80mA Maximum current 3A Switching output Resolution: 450 dpi Identification time: <1sec. FAR: <0.0000256% FRR: <0.0198% dimensions 120x71x25mm Net weight: 353g Weight including packaging and accessories 480g Temperature range -20 ° C to 50 ° C Humidity 20% - 95% non-condensing Memory: 1000 fingerprints
Optional AccessoriesInstallation cable by meterTags's: EM4102Door OpenerController Network
Controller Compact
SF300
€99.90*
Fingerprint / Fingerprint Reader and RFID Readerfor contactless universal transponderssolid waterproof metal housing IP663000 memory locations (1000 fingerprints, 2000 transponders)Fingerprint or transponder can open the doorDeletion even in the absence or loss of the tag or fingerprintController and Wiegand interface integratedUse as stand alone device (standard)Can be used as Wiegand Reader (sabotage-proof with controller in the safe area)Lock function possibleExternal door release button can be connectedSabotage contact in housingConnection for door contactFor doors, barriers, underground garages, roller shutters, etc.Relay output adjustable from 01 - 99 seconds (operating current or quiescent current)or continuous operation ON-OFF-OFF-OFF....Switching time of the alarm output (sabotage) adjustable from 1 - 3 minutesPower Fail-safe EEPROM memoryNo PC connection neededRed backlit sensor fieldLEDs and beeper integratedRead distance transponder: up to 6cmFinger sensor resolution: 500 DPIReading time: < 1 sec.Indentification time: < 1 sec.FAR: < 0,01%FRR: < 0,1%Dimensions: 128x48x26mmWeight: approx. 400gPower supply: 12V DC voltage stabilizedPower consumption quiescent: approx. 45mATemperature range: -30°C to 60°COutput load: max 2ARFID type: Universal 125kHz (EM4102 or compatible)incl. interface: Wiegand 26bit to 44bit adjustableincl. programming deviceincl. learning and cancellation cardsAssembly and Operating Instructions as PDFOptional accessoriesInstallation cableRFID card and fobsPower suppliesDoor openerAccess ControllerorController Compact