Access Control Multi RFID Reader RFID wall mountable reader for EM4102 and 13,56MHz Full metal housing with concentrated double reading field through the LED barInternational award-winning designPotted waterproof, suitable for outdoor areas TheRFID card reader will beconnected to access controller like sBoaard and SC3000NT via the Wiegand interface.The relay switching takes placein doors,sabotage attempts on the wall readers are therefore ineffective. Material: full metal, finished, Color: cappuccino black Dimensions: 103x48x22 mm Temperature range: -20 ° C to 50 ° C Protection class: IP65 Multiprotocol RFID: 125kHz: EM4102, EM4100, EM4200 Compatible RFID Chip types:13.56 MHz:  compatible to Mifare® Classic 1k and 4k, 4byte and 7byte UID ISO14443A Compatible RFID Chip types: 13.56 MHz: compatible to DESFire® EV1 and EV2 and EV3 , compatible to Ultralight®, NTAG and compatible 7byte UID Power supply: 12V DC, <35mA Operating display: LED bar red Green LED bar and beeper can be controlled Tampering alarm function The cable length to the controller can be up to 100m. Wiegand output: 34 bit for all protocols    

Glass touch keypad  and dual frequency RFID access control for EM4102 / 4100/4200 and ISO14443 compatible transponders  Full metal housing with concentrated double reading field through the LED bar and solid PIN code keypad  The use of plastic on the housing could almost be dispensed with.  Potted waterproof, suitable for outdoor areas  Multifunction with PIN code and RFID multi-protocol reader  Standalone function with relay output  Reading function connected to Wiegand connection for evaluation units such as Sboard access controllers and SC3000NT. The relay switching then takes place inside, so attempts at sabotage on the wall reader are ineffective. Technical details: PIN code and RFID reader full metal housing Glass keypad Color: cappuccino black Operating mode: standalone or reader (Wiegand) Dual frequency 125 khz and 13.56 Mhz RFID chip types 125KHz: HID prox, EM4200, EM4102 UID RFID chip types 13.56MHz: ISO 14443 Output format: Wiegand 26 / 34bit Housing: waterproof encapsulated IP65 LED and beep can be switched off Power supply: 12V DC, 50mA Dimensions: 170 x 83 x 26mm Download instruction manual: sKey2 instruction manual.pdf

Glass touch keypad  and dual frequency RFID access control for EM4102 / 4100/4200 and ISO14443 compatible transponders  Full metal housing with concentrated double reading field through the LED bar and solid PIN code keypad  The use of plastic on the housing could almost be dispensed with.  Potted waterproof, suitable for outdoor areas  Multifunction with PIN code and RFID multi-protocol reader  Standalone function with relay output  Reading function connected to Wiegand connection for evaluation units such as Sboard access controllers and SC3000NT. The relay switching then takes place inside, so attempts at sabotage on the wall reader are ineffective. Technical details: PIN code and RFID reader full metal housing Glass keypad Color: cappuccino black Operating mode: standalone or reader (Wiegand) Dual frequency 125 khz and 13.56 Mhz RFID chip types 125KHz: HID prox, EM4200, EM4102 UID RFID chip types 13.56MHz: ISO 14443 Output format: Wiegand 26 / 34bit Housing: waterproof encapsulated IP65 LED and beep can be switched off Power supply: 12V DC, 50mA Dimensions: 160 x 45 x 26mm Download instruction manual: sKey2 instruction manual.pdf

Ruggedized PIN code and dual frequency RFID access control for EM4102 / 4100/4200 and ISO14443 compatible transponders  Full metal housing with concentrated double reading field through the LED bar and solid PIN code keypad  The use of plastic on the housing could almost be dispensed with.  Potted waterproof, suitable for outdoor areas  Multifunction with PIN code and RFID multi-protocol reader  Standalone function with relay output  Reading function connected to Wiegand connection for evaluation units such as Sboard access controllers and SC3000NT. The relay switching then takes place inside, so attempts at sabotage on the wall reader are ineffective. Technical details: PIN code and RFID reader full metal Color: cappuccino black Operating mode: standalone or reader (Wiegand) Dual frequency 125 khz and 13.56 Mhz RFID chip types 125KHz: HID prox, EM4200, EM4102 UID RFID chip types 13.56MHz: ISO 14443 Output format: Wiegand 26 / 34bit Housing: waterproof encapsulated IP65 LED and beep can be switched off Power supply: 12V DC, 50mA Dimensions: 170 x 83 x 26mm Download instruction manual: sKey2 instruction manual.pdf

Sebury touch wideStand alone access systemCan be used as a complete device with integrated memory and relay outputoras a tamper-proof variant as a pure reader in connection with a door controller- Elegant and robust aluminum housing- Waterproof IP65- Illuminated touch keyboard and RFID reader for contactless transponders- 2000 memory locations for keyboard codes and transponders- Adjustable: code or transponder / code and transponder / only transponder- additional data output for professional applications: Wiegand 26-37 bit- Sabotage contact in the housing- Integrated LEDs and beeper- Acoustic alarm in the event of sabotage- alarm output- integrated changeover relay- Switching as a pulse 1-99 seconds- or as permanent ON-OFF-ON-OFF for switching functions- Bell button led out directly (internal resistance approx. 80 Ohm) only for electronic gong (max. 100mA)  or via doorbell decoder- Multi-user function, 2-10 people must identify themselves before the door is opened.- Switching as a single system or as an anti-pass-back with two readers for one door- Reading distance transponder: up to 3-10cm- Dimensions sTouch-w: 125x83x22mm- Power supply: 12V-24V DC voltage- Current: 35mA- Temperature range: -40 ° C to 60 ° C- Operating display: multifunction display (can be switched off)- Keyboard lighting: white (can be switched off or automatic when approaching)- Key tones (can be switched off)Readable transponder types:125 kHz (HID-Prox, EM4100, EM4102, EM4200 or compatible) Unique / Universal Scope of delivery:- External unit / Access Host sTouch Standalone wide- Manager cards (learning and deletion cards)- Small and fastening material- Instructions (English) print- Instructions (German) as PDFEnglish manualOperating instructions German Optional accessoriesInstallation cable by the meterTransponder EM or HIDPower supplyDoor openerControllerElectronic doorbell

Sebury sKey wideStand alone access control systemISO14443 Can be used as a complete unit with integrated memory and relay outputoras tamper-resistant variant as a mere reader in conjunction with a door controller- Elegant and robust aluminum housing- Waterproof IP65- Illuminated Metal Keypad and RFID reader for contactless transponder- 2000 memory locations for key codes and transponders- Adjustable : code or transponder / code and transponder / transponder only- Additional data output for professional applications : Wiegand 26-37 bits- Tamper switch in the housing- LEDs and beeper integrated- Audible alarm if tampering- Alarm output- Integrated change-over relay- Circuit as pulse 1-99 seconds- Or as a continuous circuit ON-OFF - ON-OFF for switching functions- Bell button directly led out ( internal resistance of about 80 ohms) for electronic Gong ( max. 10mA )  or Doorbell decoder- Multi-user function , 2-10 persons must identify themselves before the door is opened.- Circuit as a single unit or as an anti -passback with two readers for one door- Transponder reading distance : up to 3 -10cm- Dimensions sKey -w : 125x83x22mm- Power supply: 12V -24V DC- Current: 35mA- Temperature range : -40 ° C to 60 ° C- Status display : multi-function display (can be deactivated )- Keyboard Backlight : white, On or Off , or Auto ( the 1st press ON , 30 sec OFF)- Keypad tones (can be disabled )Or use as Wiegand reader in conjunction with a door controller- Transponder data is transferred- Keyboard signals can be set as 4bit , 8bit or as a virtual card number- 26bit to 37bit adjustable WiegandmodusReadable transponder types :13.56MhzISO14443 1k, 4k, 4byte oder 7byteScope of delivery:- Outdoor unit / Access host sKey standalone wide- Manager Cards ( learning and delete card )- Small and fixing material- Manual (english) Print- Manual ( German ) as PDFManual DownloadOptional AccessoriesInstallation cable by meter Power SupplyISO14443 TAGsDoor OpenerController Network Controller Compact Doorbell decoder  

Very secure RFID access systemThe control unit (sBoard) is placed in the secure area.Any manipulation on the reading unit (stouch Reader) are pointless.Complete set consisting of:1 x Controller sBoard1 x sTouch reader-W-w1 x Power Supply DIN 2A1 x Transponder K694 Uni WEG26   Manual in English

Sebury sKey smallStand alone access control systemCan be used as a complete unit with integrated memory and relay outputoras tamper-resistant variant as a mere reader in conjunction with a door controller- Elegant and robust aluminum housing- Waterproof IP65- Illuminated Metal Keypad and RFID reader for contactless transponder- 2000 memory locations for key codes and transponders- Adjustable : code or transponder / code and transponder / transponder only- Additional data output for professional applications : Wiegand 26-37 bits- Tamper switch in the housing- LEDs and beeper integrated- Audible alarm if tampering- Alarm output- Integrated change-over relay- Circuit as pulse 1-99 seconds- Or as a continuous circuit ON-OFF - ON-OFF for switching functions- Bell button directly led out ( internal resistance of about 80 ohms) for electronic Gong ( max. 10mA )  or Doorbell decoder- Multi-user function , 2-10 persons must identify themselves before the door is opened.- Circuit as a single unit or as an anti -passback with two readers for one door- Transponder reading distance : up to 3 -10cm- Dimensions sKey -s: 159x43x22mm- Power supply: 12V -24V DC- Current: 35mA- Temperature range : -40 ° C to 60 ° C- Status display : multi-function display (can be deactivated )- Keyboard Backlight : white, On or Off , or Auto ( the 1st press ON , 30 sec OFF)- Keypad tones (can be disabled )Or use as Wiegand reader in conjunction with a door controller- Transponder data is transferred- Keyboard signals can be set as 4bit , 8bit or as a virtual card number- 26bit to 37bit adjustable WiegandmodusReadable transponder types :125 kHz ( HID Prox , EM4100 , EM4102 , EM4200 or compatible) Unique / UniversalScope of delivery:- Outdoor unit / Access host sKey standalone small- Manager Cards ( learning and delete card )- Small and fixing material- Manual (english) Print- Manual ( German ) as PDFManual DownloadInstallation cable by meterTag's EM or HIDDoor OpenerController NetworkController CompactDoorbell decoder

Sebury STOUCH smallStand alone access control systemCan be used as a complete unit with integrated memory and relay outputoras tamper-resistant variant as a mere reader in conjunction with a door controller- Elegant and robust aluminum housing- Waterproof IP65- Illuminated Metal Keypad and RFID reader for contactless transponder- 2000 memory locations for key codes and transponders- Adjustable : code or transponder / code and transponder / transponder only- Additional data output for professional applications : Wiegand 26-37 bits- Tamper switch in the housing- LEDs and beeper integrated- Audible alarm if tampering- Alarm output- Integrated change-over relay- Circuit as pulse 1-99 seconds- Or as a continuous circuit ON-OFF - ON-OFF for switching functions- Bell button directly led out ( internal resistance of about 80 ohms) for electronic Gong ( max. 10mA )  or Doorbell decoder- Multi-user function , 2-10 persons must identify themselves before the door is opened.- Circuit as a single unit or as an anti -passback with two readers for one door- Transponder reading distance : up to 3 -10cm- Dimensions STOUCH s: 159x43x22mm- Power supply: 12V -24V DC- Current: 35mA- Temperature range : -40 ° C to 60 ° C- Status display : multi-function display (can be deactivated )- Keyboard Backlight : white ( can be switched off or on automatic )- Keypad tones (can be disabled )Readable transponder types :125 kHz ( HID Prox , EM4100 , EM4102 , EM4200 or compatible) Unique / UniversalScope of delivery:- Outdoor unit / Access host STOUCH standalone wide- Manager Cards ( learning and delete card )- Small and fixing material- Manual (english) Print- Manual ( German ) as PDFManual DownloadOptional AccessoriesInstallation cable by meterTag's EM or HIDDoor OpenerController NetworkController CompactDoorbell decoder

Very secure RFID access systemThe control unit (W2-2) is placed in the secure area.Any manipulation on the reading unit (stouch Reader) are pointless.Complete set consisting of:1 x Controller W2-21 x STOUCH reader-W-w1 x Power Supply DIN 2A1 x Transponder K694 Uni WEG26sTouch Leser   PDF-Manual W2-2                 PDF-Manual

Sebury sTouch wide keyboardTamper -proof outdoor unitElegant and robust aluminum housingWaterproof IP65Wear- through touch keyboard thereforeno traces of useEasy to clean due to smooth , scratch-resistant surfaceTouch pad and RFID reader for contactless transponderData connection to a controllerData output: Wiegand 26-37 bitsTamper switch in the housingIntergrated LED and beeperAudible alarm if tamperingLed out door bell button with two cores RFID reading distance : up to 3 -10cmDimensions STOUCH : 125x83x22mmPower supply: 12V DCCurrent: 35mATemperature range: -40 ° C to 60 ° CIndicator : multi-function display (can be deactivated )Keyboard Illumination: white ( can be switched off or automatic on approach )Key tones (defeatable )Readable transponder types :125 kHz ( HID Prox , EM4100 , EM4102, EM4200 or compatible) Unique / UniversalScope of delivery:- Outdoor unit / access host STOUCH reader -R w- Small and Fixings- 2 tickets Manager ( Learning and delete card )- Manual (english) Print- Manual ( German ) as PDF   PDF- Manual Download   Optional AccessoriesInstallation cable by meterTags's: EM or HIDDoor OpenerController Network Controller Compact Doorbell decoder  

Sebury sKey wide keyboardTamper -proof outdoor unit without saving- Elegant and robust aluminum housing- Waterproof IP65- Illuminated Metal Keypad and RFID reader for contactless transponder- Data connection to a controller- Delivery without door controller- Data output: Wiegand 26-37 bits- Tamper switch in the housing- Intergrated LED and beeper- Audible alarm if tampering- Bell button directly led out ( internal resistance of about 80 ohms) for electronic Gong ( max. 10mA )  or Doorbell decoder- Transponder reading distance : up to 3 -10cm- Dimensions sKey R w: 125x83x22mm- Power supply: 12V DC- Current: 35mA- Temperature range : -40 ° C to 60 ° C- Status display : multi-function display (can be deactivated )- Keyboard Backlight : white, On or Off , or Auto ( the 1st press ON , 30 sec OFF)- Keypad tones (can be disabled )Readable transponder types :125 kHz- HID Prox- EM4100 , EM4102 , EM4200 or compatible) Unique / UniversalScope of delivery:- Outdoor unit / Access host sKey reader -R -w- Small and fixing material- Manual (english) Print- Manual ( German ) as PDFPDF- ManualOptional AccessoriesInstallation cable by meterTags's: EM or HIDDoor OpenerController Network Controller Compact Doorbell decoder  

Very secure RFID access systemThe control unit (sBoard) is placed in the secure area.Any manipulation on the reading unit (stouch Reader) are pointless.Complete set consisting of:1 x Controller sBoard1 x sKey reader-W-w1 x Power Supply DIN 2A1 x Transponder K694 Uni WEG26   Manual in English

Sebury  sTouch wide Stand alone access control system with PIN Code and ISO14443 tags Can be used as a complete device with integrated memory and relay outputoras tamper-resistant  reader  connected with a door controller -Elegant and robust aluminium housing-Waterproof IP65-Illuminated metal keyboard and RFID reader for contactless transponder-2000 memory locations for key codes and transponder-Adjustable: Code or transponder code transponder or only transponder-additional data output for professional applications: Wiegand 26-37 bit-Tamper inside-Integrated led and beeper-Acoustic alarm for sabotage-Alarm output-integrated AC relay-Circuit as impulse 1-99 seconds- or as a permanent circuit on off on off for switching functions-Push button directly deduced (internal resistance approx. 80 ohms) only for electronic chime (max. 10mA)or doorbell＞ decoder-Multi user feature, 2-10 persons to identify themselves before the door is opened.-Circuit as a single unit or as anti-PassBack with two readers for a door-Reading distance tag: up to 3-10cm-Mass sTouch w: 125x83x22mm-Power supply: 12V DC-Current: 35mA-Temperature range:-40 ° C to 60 ° C-Indicator: multi function display (can be switched off)-Keypad illumination: white (can be switched off or automatic approach)-Keypad tones (can be switched off) Readable tag types:13,56 MhzISO14443 1k, 4k, 4byte or 7byte PRODUCT COMPARISON Scope of delivery:-Outdoor unit/access host sTouch standalone wide-Manager cards (learning and deleting card)-Small - and fixing material-Manual (English) print-Guide (german) as PDF Manual Download Optional AccessoriesInstallation cable by meterDoor OpenerController Network Controller Compact Doorbell decoder    

Sebury sKeyStand alone access control systemavailable as a complete unit with integrated storage and relay outputor as tamper-resistant as a pure variant reader in combination with a door controllerElegant and robust aluminum housingWaterproof IP65Metal keypad and RFID reader for contactless transponder2000 memory locations for key codes and transponders- Adjustable : code or transponder / transponder code and / transponder only- Additional data output for safety applications : Wiegand 26-37 bits- Tamper switch in the housing- Intergrated LED and beeper- Audible alarm if tampering- Alarm output- Bell push out directly- Transponder reading distance : up to 3 -10cm- Dimensions sKey -w : 125x83x22mm- Power supply: 12V -24V DC- Current: 35mA- Temperature range : -40 ° C to 60 ° C- Indicator : multi-function display (can be deactivated )- Keyboard illumination : white ( can be switched off or automatic on approach )- Keypad tones (defeatable )Readable transponder types :125 kHz ( HID Prox , EM4100 , EM4102, EM4200 or compatible) Unique / UniversalScope of delivery:- Outdoor unit / access host sKey standalone wide- Card Manager ( Learning and delete card )- Small and Fixings- Manual (english) Print- Manual ( German ) as PDFimmediately ordered, butDelivery time is about 3-4 weeks ...ManualOptional AccessoriesInstallation cable by meterTag's EM or HIDDoor OpenerController NetworkController CompactDoorbell decoder