Go to homepage
€0.00*

sKey-Standalone-w

Product number: sKey-SA-W-w

Product information "sKey-Standalone-w"

Sebury sKey
Stand alone access control system

available as a complete unit with integrated storage and relay output
or as tamper-resistant as a pure variant reader in combination with a door controller

Elegant and robust aluminum housing
Waterproof IP65
Metal keypad and RFID reader for contactless transponder
2000 memory locations for key codes and transponders
- Adjustable : code or transponder / transponder code and / transponder only
- Additional data output for safety applications : Wiegand 26-37 bits
- Tamper switch in the housing
- Intergrated LED and beeper
- Audible alarm if tampering
- Alarm output
- Bell push out directly
- Transponder reading distance : up to 3 -10cm
- Dimensions sKey -w : 125x83x22mm
- Power supply: 12V -24V DC
- Current: 35mA
- Temperature range : -40 ° C to 60 ° C
- Indicator : multi-function display (can be deactivated )
- Keyboard illumination : white ( can be switched off or automatic on approach )
- Keypad tones (defeatable )

Readable transponder types :
125 kHz ( HID Prox , EM4100 , EM4102, EM4200 or compatible) Unique / Universal

Scope of delivery:
- Outdoor unit / access host sKey standalone wide
- Card Manager ( Learning and delete card )
- Small and Fixings
- Manual (english) Print
- Manual ( German ) as PDF

immediately ordered, but
Delivery time is about 3-4 weeks ...

Manual

Optional Accessories

Installation cable by meter

Tag's EM or HID

Door Opener

Controller Network

Controller Compact


Doorbell decoder


0 of 0 reviews

Leave a review!

Share your experiences with other customers.

SVB600 Electrical Door Lock
SVB600 Electrical Door Lock
suitable for wooden doors, steel doors, fire doorsInstallation in the door frame (no mov cable crossings)Massive 16mm steel boltstested up to 1000kgfor 12V DC voltage ("red" and "brown")not suitable for permanently controlled openFunction: via normally open contact ("orange" to "Brown")Current consumption 950mA at openingStand by 20mADimensions boltwork: 100x25x30mmDimensions striking plate: 260x30x39mmincluding back contact for surveillance or alarm system("Blue", "Green" and "White")including counterpart identification (bar closes again when the door was closed)When permission is unlocked and the door can be opened.Always possible mechanical emergency opening (inside thumbturn key cylinder outside)Included, see photo:- El. locking- Counterpart- aperture- Brackets for flush mounting- Lock cylinder including 5 keys and rotary knob- Covers and rosettes- screws

€99.90*
Details
CB-1
CB-1
Electronic doorbell for the bell button or The doorbell decoder of the STouch or skey devices 4 Wires for power supply and switching contact Requires 12v DC voltage Dimensions: 75x62x24mm Tonabfolge: Ding-dong--ding-dong---Ding-dong For all STouch/Skey devices with Bell button    

€9.99*
Details
HDR-30-12 Power Supply
HDR-30-12 Power Supply
Energy-efficient and space-saving power supply for installation in electrical distribution boards (DIN rail); The power supply is suitable for all access control devices available in the shop such as code locks with PIN code and RFID as well as access controllers and RFID readers. The power supply unit is simply plugged onto a top-hat rail in your electrical distribution system and snapped in. The wires to be stripped are connected via the screw terminals.    2 TE (35mm) narrow version    Stabilized output voltage, short-circuit proof    Input: 85 - 264V AC, 50/60Hz    0,3W Idle power    Short circuit proof    Overvoltage protection category 3    overload protector    Output: 12V DC / 2000mA    LED for operating status display    Dimensions: 35x90x55mm    Ambient temperature: -30°C to 70°C    Compatible to DIN rail TS-35/7.5    Colour: black

€22.90*
Details
Voltage Converter 28V-12V
Voltage Converter 28V-12V
converts 24V AC or DC voltage to 12V DC Input: AC 20V - 28V, DC 16V - 30V Output: 12V DC, stabilized Load max. 500mA Dimensions: 63x29x25mm  

€9.90*
Details
SC3001NT
SC3001NT
Single Door ControllerIndependent media,Compatible with wiegand reader: RFID (125khz, 13.56 MHz, 868 MHz), code keypads, fingerprint systems, magnetic card reader, etc.1 relay output for door opener, barrier system, etc.Any number of controllers of the IK-Point SC300xNT series and nearly unlimited numbers of persons can be centrally managed through the access control software.Inputs for external buttons, door monitoring, evaluation for unauthorized opening, etc.The cable length to  the external readers can be up to 100m.Transponder can be taught in four ways into the system:- Teaching at the door reader- Teach using a USB reader RD105-US 8D WEG26- Manual input on the PC keyboard (if the Wiegand number is known)- Block storage of assorted transponders (eg 1000 pcs in a minute)Memory for up to 20,000 peopleEvent memory up to 100,000 eventsBoard dimensions: 160x106mmincluding LAN interface RJ45including 2 x Wiegand 26 Interfaceincluding extensive English-language Windows software (free)Attention!The new SC3000 controllers are not compatible with the former SC9000 controllers Wiring German Manual English Software German manual for the German software Accessories Installation cable by meter Periphery Output board Casing without power supplyor Case with power supply WIFI adapter Compatible RFID / PIN Code readerDoor Opener Door Contact    

€159.00*
Details
Sboard ISO14443
Sboard ISO14443
Open door access controllerAccess control system for Wiegandable access readersorcontrol unit as EMA arming/disarming device1000 memory locations for transponders or PIN codesAccess with RFID only, PIN only or RFID + PINSingle RFID tags and PINs can be deleteted separatlyExternal door release button can be connectedLED output for display on the readerOutput adjustable via jumperVoltage is switched directly through (factory setting) or floating relay contact Change-over contactPulse 1-99 seconds or Dynamic ON-OFF-OFF-OFF....Power-fail-safe EEPROM memoryBlock storage with sorted transponders Enter the first UID number and quantity, ready (e. g. 1000 pcs. in approx. 2 minutes)No PC connection neededCopy the entire memory contents into one or more sBoards as a "backup copy" or as a fast creation for several doorsWiegand input 26-37bit e. g. for RFID readers EM4102, HITAG, ISO14443, LEGIC, UHF, etc. with or without PIN-code keypad, magnetic card reader, fingerprint reader, biometric face recognition.When using ISO14443 wall scanners, please always order the ISO14443 programming card set as well, or alternatively use the supplied remote controlDimensions: 65x54x19mmWeight: 40gOperating temperature: -40°C to 60°CPower supply: 12V DC voltageOutput load: max. 2Aincl. infrared programming device for all changes, settings (password protection 6-digit)incl. programming cards Set for your selected ISO14443 wall readerEnglish instruction manualGerman manual as PDF filePower indicator: LED redLED and signal tones can be switched off Wiring samplesHow do I open the case?Operating instructions (german)Manual (english)AccessoriesProgramming Card Set for ISO14443 ReaderInstallation cableSuitable readers with EM 4102 technologySuitable readers with ISO14443 technologySuitable readers OtherPower suppliesDoor opener

From €25.50*
Details
Cable JY-ST-Y-4x2-06
Cable JY-ST-Y-4x2-06
sold by the meter 8 wire, twisted pair wires common shielding Installation cable according to DIN EN 50441; VDE 0815 JY (ST) Y 4x2x0, 6mm Insulation: PVC jacket Suitable for installation in dry and damp rooms. Surface or buried, for fixed installation in outdoor areas. Depending on the current consumption of the connected consumer, ensure sufficient cross-section. 0.6 mm = 0.28 mm ² color assignment 1a red 1b blue 2a white 2b yellow 3a white 3b green 4a white 4b brown

€0.50*
Details
W3-C
W3-C
RFID and code / waterproof / 2,000 people Access control system with integrated RFID reader antenna for contactless transponder Solid steel housing, vandal and tamper-proof Waterproof IP68 sealed 2,000 memory places (people)Transponder only or Code only or Transponder + Code Individual transponders also erased if lost Controller and integrated active antenna · - Use as a standalone device (default)· - Use as a pure controller (also for antennas (LEGIC, ISO14443, Hitag, etc.)· - Use antenna as possible Wiegand26 External door opener button can be connectedTamper switch in the housingConnection for door contactFor doors, gates, garages, shutters, etc.Potential free relay output 00-99 seconds adjustable (change)Switching time of the alarm output (sabotage) 0-3 minutes adjustableFail-safe EEPROM memory powerNo PC connectionblue backlit keypadIntegrated LEDs and beeper Reading distance: up to 6cmDimensions: 128x82x28mm Weight: ca.700gPower supply: 12V-24V DC or AC voltageCurrent consumption: approx 40mA Transponder type: Universal 125kHz (EM4102 or compatible) including interface: Wiegand 26 bit in / outincluding 2 programming cards for fast learning of transpondersInstallation and operating instructions Manual  Optional AccessoriesTags, Cards, FobsReader (W1-C is indoor mounted)Controller (W1-C is outdoor mounted as Reader)Power SuppliesLocker & Strikes

€69.00*
Details
sKey-Standalone-W-s
sKey-Standalone-W-s
Sebury sKey smallStand alone access control systemCan be used as a complete unit with integrated memory and relay outputoras tamper-resistant variant as a mere reader in conjunction with a door controller- Elegant and robust aluminum housing- Waterproof IP65- Illuminated Metal Keypad and RFID reader for contactless transponder- 2000 memory locations for key codes and transponders- Adjustable : code or transponder / code and transponder / transponder only- Additional data output for professional applications : Wiegand 26-37 bits- Tamper switch in the housing- LEDs and beeper integrated- Audible alarm if tampering- Alarm output- Integrated change-over relay- Circuit as pulse 1-99 seconds- Or as a continuous circuit ON-OFF - ON-OFF for switching functions- Bell button directly led out ( internal resistance of about 80 ohms) for electronic Gong ( max. 10mA )  or Doorbell decoder- Multi-user function , 2-10 persons must identify themselves before the door is opened.- Circuit as a single unit or as an anti -passback with two readers for one door- Transponder reading distance : up to 3 -10cm- Dimensions sKey -s: 159x43x22mm- Power supply: 12V -24V DC- Current: 35mA- Temperature range : -40 ° C to 60 ° C- Status display : multi-function display (can be deactivated )- Keyboard Backlight : white, On or Off , or Auto ( the 1st press ON , 30 sec OFF)- Keypad tones (can be disabled )Or use as Wiegand reader in conjunction with a door controller- Transponder data is transferred- Keyboard signals can be set as 4bit , 8bit or as a virtual card number- 26bit to 37bit adjustable WiegandmodusReadable transponder types :125 kHz ( HID Prox , EM4100 , EM4102 , EM4200 or compatible) Unique / UniversalScope of delivery:- Outdoor unit / Access host sKey standalone small- Manager Cards ( learning and delete card )- Small and fixing material- Manual (english) Print- Manual ( German ) as PDFManual DownloadInstallation cable by meterTag's EM or HIDDoor OpenerController NetworkController CompactDoorbell decoder

€99.00*
Details
Sebury touch wide Stand alone access system
Sebury touch wide Stand alone access system
Sebury touch wideStand alone access systemCan be used as a complete device with integrated memory and relay outputoras a tamper-proof variant as a pure reader in connection with a door controller- Elegant and robust aluminum housing- Waterproof IP65- Illuminated touch keyboard and RFID reader for contactless transponders- 2000 memory locations for keyboard codes and transponders- Adjustable: code or transponder / code and transponder / only transponder- additional data output for professional applications: Wiegand 26-37 bit- Sabotage contact in the housing- Integrated LEDs and beeper- Acoustic alarm in the event of sabotage- alarm output- integrated changeover relay- Switching as a pulse 1-99 seconds- or as permanent ON-OFF-ON-OFF for switching functions- Bell button led out directly (internal resistance approx. 80 Ohm) only for electronic gong (max. 100mA)  or via doorbell decoder- Multi-user function, 2-10 people must identify themselves before the door is opened.- Switching as a single system or as an anti-pass-back with two readers for one door- Reading distance transponder: up to 3-10cm- Dimensions sTouch-w: 125x83x22mm- Power supply: 12V-24V DC voltage- Current: 35mA- Temperature range: -40 ° C to 60 ° C- Operating display: multifunction display (can be switched off)- Keyboard lighting: white (can be switched off or automatic when approaching)- Key tones (can be switched off)Readable transponder types:125 kHz (HID-Prox, EM4100, EM4102, EM4200 or compatible) Unique / Universal Scope of delivery:- External unit / Access Host sTouch Standalone wide- Manager cards (learning and deletion cards)- Small and fastening material- Instructions (English) print- Instructions (German) as PDFEnglish manualOperating instructions German Optional accessoriesInstallation cable by the meterTransponder EM or HIDPower supplyDoor openerControllerElectronic doorbell

€79.00*
Details
Set-13
Set-13
Very secure RFID access systemThe control unit (sBoard) is placed in the secure area.Any manipulation on the reading unit (stouch Reader) are pointless.Complete set consisting of:1 x Controller sBoard1 x sKey reader-W-w1 x Power Supply DIN 2A1 x Transponder K694 Uni WEG26   Manual in English

€114.48*
Details

Zuletzt angesehen

This website uses cookies to ensure the best experience possible. More information...